"10 Mains Heart"

Norman Steele

Index settings are for a 64 tooth gear.


I cut this laser ruby heart for my daughter-in-law, Tracy

Pavilion

  • Cut 4 facets to constant height at
    43.0º, index 02, 24, 40, 62.
  • Cut 2 facets at 40.1º index 15, 49.
  • Cut 2 facets at 43.6º index 20, 44.
  • Cut 2 facets at 39.4º index 28, 36.
  • Cut 2 facets at 42.0º index 27, 37.
  • Cut 2 facets at 44.8º index 25, 39.
  • Cut 2 facets at 90.0º index 27, 37.
  • Cut 2 facets at 90.0º index 25, 39.
  • Cut 2 facets at 45.1º index 23, 41.
  • Cut 2 facets at 45.6º index 21, 43.
  • Cut 2 facets at 90.0º index 23, 41.
  • Cut 2 facets at 90.0º index 21, 43.
  • Cut 2 facets at 45.0º index 19, 45.
  • Cut 2 facets at 44.7º index 17, 47.
  • Cut 2 facets at 90.0º index 19, 45.
  • Cut 2 facets at 90.0º index 17, 47.
  • Cut 2 facets at 42.1º index 13, 51.
  • Cut 2 facets at 43.7º index 03, 61.
  • Cut 2 facets at 44.0º index 08, 56.
  • Cut 2 facets at 90.0º index 13, 51.
  • Cut 2 facets at 90.0º index 08, 56.
  • Cut 2 facets at 90.0º index 03, 61.
  • Cut 1 facet at 59.1º index 64.
  • Cut 1 facet at 90.0º index 64.
    Polish, then transfer dop to culet.


Crown

  • Cut 1 facets at 45.0º index 64.
  • Cut 2 facets at 36.0º index 03, 61.
  • Cut 2 facets at 37.0º index 08, 56.
  • Cut 2 facets at 34.7º index 13, 51.
  • Cut 2 facets at 37.0º index 17, 47.
  • Cut 2 facets at 37.3º index 19, 45.
  • Cut 2 facets at 37.8º index 21, 43.
  • Cut 2 facets at 37.3º index 23, 41.
  • Cut 2 facets at 36.2º index 25, 39.
  • Cut 2 facets at 34.3º index 27, 37.
  • Cut 2 facets at 31.7º index 28, 36.
  • Cut 2 facets at 35.0º index 24, 40.
  • Cut 2 facets at 35.6º index 20, 44.
  • Cut 2 facets at 32.3º index 15, 49.
  • Cut 2 facets at 35.0º index 02, 62.
  • Cut table facet at 00.0º index any.
  • Polish.